We just use the inexpensive 18/2 sprinkler wire found just about anywhere
for runs up to 2000' -- over that, go with the shielded.  

Another way to go about super long runs might be to use a radio transmitted
float switch.  Have yet to try it, but they look nice and as I recall only a
couple hundred bucks or so.  

http://remotecontroltech.com/Applications/pumpcontrol.aspx 

 

Best regards,

 

Mark Dickson,

NABCEP Certified Solar PV Installer T

Oasis Montana Inc.

 

 

  _____  

From: re-wrenches-boun...@lists.re-wrenches.org
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Bob-O
Schultze
Sent: Monday, August 23, 2010 6:45 PM
To: RE-wrenches
Subject: Re: [RE-wrenches] Grundfos SQ Flex Float Switch

 

Hiya Kirpal,

They are just signal wires from the CU200.

Cheers, Bob-O

 

On Aug 23, 2010, at 1:54 PM, Kirpal Khalsa wrote:


Hi All.....I can't find it in any of the manuals for grundfos.....does
anyone know if the wiring to the float switch carries current or not.  The
float switch has 3 #14AWG wires.......I need to add about 700 feet of wire
from the CU 200 controller to the storage tank.....I want to use
#18AWG......is this okay?  most float switches I have used do not carry
current they are simply signal wires and can use very small gauge for long
distance.....
Anyone know off the top of their head?
Thanks....

-- 
Sunny Regards,
Kirpal Khalsa
NABCEP Certified Solar PV Installer
Renewable Energy Systems
www.oregonsolarworks.com <http://www.oregonsolarworks.com/> 
541-218-0201 m
541-592-3958 o
_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

 

_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

Reply via email to