Hiya Kirpal, They are just signal wires from the CU200. Cheers, Bob-O On Aug 23, 2010, at 1:54 PM, Kirpal Khalsa wrote:
Hi All.....I can't find it in any of the manuals for grundfos.....does anyone know if the wiring to the float switch carries current or not. The float switch has 3 #14AWG wires.......I need to add about 700 feet of wire from the CU 200 controller to the storage tank.....I want to use #18AWG......is this okay? most float switches I have used do not carry current they are simply signal wires and can use very small gauge for long distance..... Anyone know off the top of their head? Thanks.... -- Sunny Regards, Kirpal Khalsa NABCEP Certified Solar PV Installer Renewable Energy Systems www.oregonsolarworks.com 541-218-0201 m 541-592-3958 o _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
