Thanks for the input Jeff. This is a basic small Meter/Main (100A) only. The
feeder leaves the main and runs about 200' to the house. Removing the short
jumper leads from the meter socket and routing them to another panel and then
back again to the Main seems like far more modification to the panel then my
tap. I'm sure it is not listed for this increased conductor length and
rerouting either.
-jeff o
>From the Solar, Wind and Hydro powered office of Jeff Oldham/Regenerative
>SOLutions
____________________________________________________________
Penny Stock Jumping 2000%
Sign up to the #1 voted penny stock newsletter for free today!
http://thirdpartyoffers.juno.com/TGL3131/4c1a56dd95e0b48ac8cst01vuc
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org