Our customer, an engineer in San Diego, self-installed 28 KC120 modules in
2002. May 25, 2010, he reported that the array output stopped. The same day
I emailed him that his test results indicated that the problem was bad cell
interconnects, that Kyocera knew of the problem, did not recall the modules,
but instead was replacing reported bad modules, and gave him some Kyocera
email addresses. The next day someone from Kyocera emailed our customer.
June 9 the replacement modules arrived. I don't know if he received
remanufactured modules.
Joel Davidson
----- Original Message -----
From: "Bill Loesch" <solar1onl...@charter.net>
To: "RE-wrenches" <re-wrenches@lists.re-wrenches.org>
Sent: Tuesday, June 08, 2010 12:56 PM
Subject: Re: [RE-wrenches] Astopower 120 failure
Fellow Wrenches,
Is there any variation in the "business model" of _any_ other takeover of
now defunct module manufacturers? e.g.. Siemens - Shell - SolarWorld?
I was recently at one of the solar industries current profit centers, dba
"training", which featured, among others, ET Solar (single and multicrystal
manufacturer based in China). The subject of warranty came up and the
presenter stated that their quality and power output warranty was backed up
with warranty insurance such that if ET would not be around in ten days or
ten/twenty years the insurance would still be available. Comments?
Thanks,
Bill Loesch
Solar 1 - Saint Louis Solar
----- Original Message -----
From: "Bill Brooks" <billbroo...@yahoo.com>
To: "'RE-wrenches'" <re-wrenches@lists.re-wrenches.org>
Sent: Tuesday, June 08, 2010 10:46 AM
Subject: Re: [RE-wrenches] Astopower 120 failure
Carl and David,
Of course this means nothing related to the AstroPower warranty. The lawyers
at GE Energy were very careful to wait until AstroPower was officially dead
before they bought the Equipment to make modules from them. There is no
warranty--even though they are materially identical to the early GE product.
In the U.S. we call that "business".
Bill.
-----Original Message-----
From: re-wrenches-boun...@lists.re-wrenches.org
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of David
Brearley
Sent: Tuesday, June 08, 2010 8:32 AM
To: RE-wrenches
Subject: Re: [RE-wrenches] Astopower 120 failure
Carl,
Here's an excerpt from a news release that went out in late-December:
"Motech Industries Inc. (6244. TW) has signed an agreement to acquire GE
Energy¹s (NYSE: GE) Delaware solar module assembly operation. The plant,
which is located in Newark, Delaware assembles crystalline silicon based
photovoltaic modules and currently employs 75 people.
Financial terms were not disclosed.
With the acquisition, Motech will be granted the rights to use GE Energy¹s
module trademark for two years. In addition, Motech will assume the
responsibility to provide warranty services to GE¹s existing module clients.
Motech has been a supplier of solar cells to GE Energy for the past four
years."
David Brearley, Senior Technical Editor
SolarPro magazine
NABCEP Certified PV Installer
On 6/8/10 10:13 AM, "Carl Hansen" <solar...@cybermesa.com> wrote:
I have a warrantee issue with an Astropower 120, from what I've read it
seems GE bought them out. Does anyone have contact info at hand for GE ?
The panel is showing two burn marks on the backing at the point of two
adjacent solder joints on one cell.
Carl,
Hansen&Sun Electric
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
