HI Rebekah, The most amazing thing is that the tool is only $100 even on this site. Since the parts are interchangeable, then does this tool work for the MC as well?
jay peltz power On Apr 11, 2010, at 5:38 AM, Rebekah Hren wrote: > Hi Wrenches, > After the MC4 shortage update a few weeks back I started scouting for parts. > Amphenol showed up as a compatible connector that can mate with MC4 - > apparently Suntech d series modules are switching to Amphenol. > > Has anyone used/seen these? What do you think the implications might be for > connecting an MC4 to a non MC4 (supposedly these mate perfectly and have been > tested to have no higher resistance than MC4 to MC4)? > > Here's a supplier page: > http://sg.farnell.com/jsp/level5/module.jsp?moduleId=en/543752.xml > > I have a pdf of the announcement from Suntech with more info, can email on > request. > Thanks, > Rebekah Hren > Durham NC > > > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Options & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org >
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
