Wrenches, Hope your days are going well. We have a prospective customer (adjacent to a sewer treatment plant) who is concerned that there may be an issue with mold growth on or under the PVL laminate modules that we are planning to install. The PVL module datasheet states that the adhesive has a microbial inhibitor but the customer does not believe that inhibitor alone will prevent mold from growing on, under or around the modules. The customer also suggests that the environment will be more acidic than typical. They have inquired as to how the pv equipment may be affected by these items over the installation's lifetime. So, does anyone have industry experience with either or both of these environmental concerns? How might the customer's concerns be addressed/alleviated? Thanks much.
Thank you, Randy Hatch LEED AP, NABCEP #091308-28 ra...@third-sun.com, www.third-sun.com p740-597-3111 x28, f740-597-9775 Clean Energy - Expertly Installed Please consider the environment before printing this e-mail. _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
