Peter:
Excuse me if I am exhibiting my ignorance, but won't a Normally Closed
relay fault in the undesirable state?
William Miller
At 10:44 AM 10/2/2009, you wrote:
I seem to have lost the email that recommended a battery sensor that can
function in a high-voltage disconnect system. We have a 48V battery bank
as part of an AC coupled Grid-Tied Battery Backup System and I have
already installed a N/C 2P relay on the output of the SB3000 inverter. So
all I need is a sensor that will provide a 12Vdc signal to the relay coil
at the HV set point.
Someone was kind enough to recommend a unit and if they are reading this,
please resend your recommendation!
- Peter
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
