I seem to have lost the email that recommended a battery sensor that can function in a high-voltage disconnect system. We have a 48V battery bank as part of an AC coupled Grid-Tied Battery Backup System and I have already installed a N/C 2P relay on the output of the SB3000 inverter. So all I need is a sensor that will provide a 12Vdc signal to the relay coil at the HV set point.
Someone was kind enough to recommend a unit and if they are reading this, please resend your recommendation! - Peter Peter T. Parrish, Ph.D., President California Solar Engineering, Inc. 820 Cynthia Ave., Los Angeles, CA 90065 CA Lic. 854779, NABCEP Cert. 031806-26 <mailto:peter.parr...@calsolareng.com> peter.parr...@calsolareng.com Ph 323-258-8883, Mobile 323-839-6108, Fax 323-258-8885
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
