Maybe I missed this information, but does anyone know 1) the address of this system? 2) the installer? See http://www.marriagetogo.com/homeoffice.html
----- Original Message ----- From: Michael Welch To: 'RE-wrenches' Sent: Wednesday, February 11, 2009 6:48 PM Subject: Re: [RE-wrenches] Panel Fire This seems corroborating. It has GOT to be the same situation: http://www.examiner.com/x-432-Wedding-and-Marriage-Examiner~y2009m2d10-Our-wedding-anniversary-like-a-house-on-fire-literally Search the page for "solar" to get to the crux of it, and . P.S. Tempered glass won't melt, but clear plastic goop poured over the top of silicon cells (which can be seen littering the roof) will melt. These are probably homemade modules. What I see on the charred roof is consistent with plastic encapsulated modules burning and melting. Also, the racking is consistent with the first pre-fire photo. These poor folks really got taken to the cleaners by their "installer" which MUST BE STOPPED. Brian Sipp wrote at 06:17 PM 2/11/2009: I may be very wrong here and I don’t mean to impugn anyone’s integrity, but don’t forget that in this era of digital animation movies you can’t always believe what you see in a photo either. (I'm sure no one here has ever Photoshopped a photo to make it more presentable looking.) I couldn't help but notice that the bottom right corner of the photo was surprisingly blurry and indistinct. It is difficult to distinguish one thing from the next, when just a few feet away but out of the range of detail in the photo, things seemed to be much clearer. I’ve never seen a photo look like that in reality. It’s as if the roof and array have mysteriously melted together. Also, I have never seen tempered glass melt in a low temperature fire. If it were a high temperature fire the roof would not have survived. I think that a great deal of caution is warranted especially considering the lack of detail that the poster is giving about the panels, location, installer/supplier, existence of another array etc. --- On Wed, 2/11/09, Allan Sindelar <al...@positiveenergysolar.com> wrote: From: Allan Sindelar <al...@positiveenergysolar.com> Subject: Re: [RE-wrenches] Panel Fire To: "'RE-wrenches'" <re-wrenches@lists.re-wrenches.org> Date: Wednesday, February 11, 2009, 12:57 PM One detail I haven't heard mentioned yet and am curious about - the photo of the fire damage appears to show the corner of another west(?)-facing array. I find it curious that the system owner described a 2 kW system made up of eight 250W(!) modules, which are clearly visible in the topmost system photo. There's just a whole lot that doesn't jive in this whole story. Scary to me. Allan at + NRG ------------------------------------------------------------------------------ _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
