I've done a couple of these 3 stacks. Operation of all functions seems quite good once things are set up properly. Setup & configuration is possible with only the System Control Panel...but it's easier with a computer provided that you have the XW Configuration software/hardware bundle.
This same Configuration tool (also called "the dongle" by the Xantrex technicians) is also needed if you want to upgrade the firmware. The software/hardware bundle is slightly counterintuitive...as with all computer products, right? One must install drivers and otherwise make like a power user. Wait times when calling Xantrex tech support are notoriously lengthy. Note to Xantrex: please change the music on hold so that it plays more than one tune. Mick Abraham, Proprietor www.abrahamsolar.com Voice: 970-731-4675 ---------- Original Message ----------- From: jay peltz <j...@asis.com> To: RE-wrenches <re-wrenches@lists.re-wrenches.org> Sent: Mon, 22 Dec 2008 11:36:59 -0800 Subject: [RE-wrenches] xantrex XW 3 stack > Hi All, > > Happy holidays. > > how many out there have done a XW 6048 3 stack off grid. 120/240v > power not 3 phase > and what are the issues you've seen? > > thanks, > > jay > > peltz power > _______________________________________________ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Options & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org ------- End of Original Message ------- _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
