Wrenches.
On an upgrade to an existing system, we just installed a Xantrex
XW6048 inverter. We have a 48 volt dc battery box vent fan that we
used to run through the relay on the old SW5548. The XW6048 has a 12
vdc aux output so I assume we need to install a relay to run the fan,
12vdc input, that will allow 48 vdc output
Any suggestions on what relay to use?
Thanks
Larry Brown
Sun Mountain
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
