Hi Jeff,
Yep the AEI GC-1000
Not being made anymore, nor as far as I know is anyone servicing these
units.
Best bet is to rewire the array for higher voltage and use a new
inverter.
Not too many other options that I know of.
jay
peltz power
On Sep 23, 2008, at 11:42 AM, Jeff Yago wrote:
Anybody out there familiar with the Advanced Energy Inc. grid-tie
inverter?
I was called to a school with an existing defunct pole-mounted 1 kW
array and high up on the pole was an inverter made by these guys. I
could not get access to the unit as I was only checking for what was
there now, but it was an outdoor enclosure that was tall and narrow,
with the AC and DC bkrs located near the bottom under a clear flex-
rubber type cover. It appears this is a 120 VAC output inverter in
the 1 to 1.5 kW size range, and includes a remote display connected
by a phone type cable.
I could not find any information that this inverter is still being
made, and estimate it is about 4 years old.
Thanks,
Jeff Yago
Netscape. Just the Net You Need.
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
