You'll have to do a vid when she's under her own power so we can see it at
work...

Derek

On Wed, Feb 6, 2013 at 7:40 PM, TyngTech <[email protected]> wrote:

> The Tyng T-Max suspension is basically an easily assembled and adjustable
> rubber torsion axle (RTA) ideal for use in small vehicular applications.
> RTA's are commonly used in the trailer industry and commercial applications
> where compact size and low parts count are advantageous.  They consist of a
> square axle inserted into a larger square outer casing at a 45 degree
> offset.  Compressed rubber cords are sandwiched between the two pieces and
> provide a springing and damping function.   The manufacture of RTA's
> usually require specialized jigs that compress and insert the axle and
> rubber cords into the outer casing under high pressure.  A process that
> Airstream trailers uses requires liquid nitrogen to freeze the assembly
> for insertion into the outer casing.  Once initially assembled, RTA's are
> set for life as there is no way to adjust them or repair them after
> manufacture.
>
> What I have done in my implementation is to basically split the outer
> casing.  What this allows you to do is to insert the inner axle and
> uncompressed rubber cords into the assembly and then squeeze it all down by
> clamping the outer casing back together.  A big advantage with this setup
> is that you can easily adjust spring rate by changing the length of the
> rubber cords.  Longer cords give you a stiffer suspension, shorter cords, a
> softer and more compliant suspension.  Another feature in my design is a
> bushing that supports the back end of the inner axle (needed when the cords
> are shorter).  The bolt that holds the trailing arm to the inner axle can
> be loosened and allows you to adjust the angle of the arm in relation to
> the inner axle.  This gives you the ability to adjust whatever preload you
> need for your application.  By reviewing the pics you can see that the
> design is easily fabricated using ordinary hardware store items.
>
> Believe it or not, the split casing design in this application appears to
> be a fairly innovative concept according to a couple of sources and with
> potential commercial applications.  I've started the process of a patent
> application to see if the patent office concurs.
>
> Steve Tyng, 2/6/2013
>
>
> Prototype assembled on the bench.
>
>
> <https://lh5.googleusercontent.com/-ilJP8qpWj3o/URL8nGg6yYI/AAAAAAAAAKg/_x2x_5ARxbw/s1600/T-Max1.jpg>
>
>
> Compression plate removed.
>
>
> <https://lh5.googleusercontent.com/-w8mmV5vcDcg/URL8tI-upCI/AAAAAAAAAKo/EUORKZXQm-o/s1600/T-Max2.jpg>
>
>
> All the bits.
>
>
> <https://lh5.googleusercontent.com/-wLsNPclE_Fo/URL8yOriuvI/AAAAAAAAAKw/ACehPsSgaRs/s1600/T-Max3.jpg>
>
>
> First production version first assembled.
>
>
> <https://lh4.googleusercontent.com/-CalHSQqPhoA/URL816Q2VDI/AAAAAAAAAK4/fmWLcuLCVIU/s1600/T-Max4.jpg>
>
>
>
>
>
>
>  --
> --
> You are currently subscribed to the "R/C Tank Combat" group.
> To post a message, send email to [email protected]
> To unsubscribe, send email to [email protected]
> Visit the group at http://groups.google.com/group/rctankcombat
>
> ---
> You received this message because you are subscribed to the Google Groups
> "R/C Tank Combat" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> For more options, visit https://groups.google.com/groups/opt_out.
>
>
>

-- 
-- 
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to [email protected]
To unsubscribe, send email to [email protected]
Visit the group at http://groups.google.com/group/rctankcombat

--- 
You received this message because you are subscribed to the Google Groups "R/C 
Tank Combat" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
For more options, visit https://groups.google.com/groups/opt_out.


Reply via email to