The Tyng T-Max suspension is basically an easily assembled and adjustable rubber torsion axle (RTA) ideal for use in small vehicular applications. RTA's are commonly used in the trailer industry and commercial applications where compact size and low parts count are advantageous. They consist of a square axle inserted into a larger square outer casing at a 45 degree offset. Compressed rubber cords are sandwiched between the two pieces and provide a springing and damping function. The manufacture of RTA's usually require specialized jigs that compress and insert the axle and rubber cords into the outer casing under high pressure. A process that Airstream trailers uses requires liquid nitrogen to freeze the assembly for insertion into the outer casing. Once initially assembled, RTA's are set for life as there is no way to adjust them or repair them after manufacture.
What I have done in my implementation is to basically split the outer casing. What this allows you to do is to insert the inner axle and uncompressed rubber cords into the assembly and then squeeze it all down by clamping the outer casing back together. A big advantage with this setup is that you can easily adjust spring rate by changing the length of the rubber cords. Longer cords give you a stiffer suspension, shorter cords, a softer and more compliant suspension. Another feature in my design is a bushing that supports the back end of the inner axle (needed when the cords are shorter). The bolt that holds the trailing arm to the inner axle can be loosened and allows you to adjust the angle of the arm in relation to the inner axle. This gives you the ability to adjust whatever preload you need for your application. By reviewing the pics you can see that the design is easily fabricated using ordinary hardware store items. Believe it or not, the split casing design in this application appears to be a fairly innovative concept according to a couple of sources and with potential commercial applications. I've started the process of a patent application to see if the patent office concurs. Steve Tyng, 2/6/2013 Prototype assembled on the bench. <https://lh5.googleusercontent.com/-ilJP8qpWj3o/URL8nGg6yYI/AAAAAAAAAKg/_x2x_5ARxbw/s1600/T-Max1.jpg> Compression plate removed. <https://lh5.googleusercontent.com/-w8mmV5vcDcg/URL8tI-upCI/AAAAAAAAAKo/EUORKZXQm-o/s1600/T-Max2.jpg> All the bits. <https://lh5.googleusercontent.com/-wLsNPclE_Fo/URL8yOriuvI/AAAAAAAAAKw/ACehPsSgaRs/s1600/T-Max3.jpg> First production version first assembled. <https://lh4.googleusercontent.com/-CalHSQqPhoA/URL816Q2VDI/AAAAAAAAAK4/fmWLcuLCVIU/s1600/T-Max4.jpg> -- -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat --- You received this message because you are subscribed to the Google Groups "R/C Tank Combat" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
