IIRC, there are a few bench mounted Park stands here - http://cyclofiend.com/shop/
Others have made good salient points for mounting height. If it's primarily to be the "high torque" resource, I'd try to approximate the position where you "bear down" - for me, that's a bit lower than my regular preferred workstand height. - J On Monday, March 4, 2013 7:27:22 AM UTC-8, GeorgeS wrote: > > My new work shop is coming along and the contractor has started asking me > about the interior. I have a Park bike stand that I use all the time and > that I intend to use in the new shop. I find that stand inadequate for > some jobs, particularly those requiring the application of significant > torque (removing fixed cup, the occasional recalcitrant seat post, etc.) > So, I purchased a Park wall-mounted bike clamp. It came with no > instructions. Anyone have any advice on how far off the floor to install > this thing? 700c wheels touching the floor? A couple of inches of > additional space? Higher? This clamp has to be screwed into a stud, so I > don't want to get it right the first time if possible. Thanks. > GeorgeS > New Orleans > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en. For more options, visit https://groups.google.com/groups/opt_out.
