Not sure what brakes you have but if they were centerpulls you could just change out the center bolt with a longer one. This same reason is why I use centerpulls on my non-canti bikes, I was having a similar issue.
On Tue, Feb 5, 2013 at 10:38 PM, Philip Williamson < philip.william...@gmail.com> wrote: > Can you mount the (big or little) bracket inside the fork, on the brake > bolt, next to the daruma? > Can you hammer the L bracket flat and mount the bolt hole onto the daruma, > so the spring mounting hole peeks out from the crown? > Can you drill a hole in the fender and mount the L bracket to the fender > instead of on the bolt? > > Philip > www.biketinker.com > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to rbw-owners-bunch+unsubscr...@googlegroups.com. > To post to this group, send email to rbw-owners-bunch@googlegroups.com. > Visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en. > For more options, visit https://groups.google.com/groups/opt_out. > > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en. For more options, visit https://groups.google.com/groups/opt_out.
