Are we really thinking that a piece of wire is going to cut into a 1/8th inch thick piece of steel and it wont cut right thru a plastic cable liner?
Scott On Mon, Jan 14, 2013 at 1:33 PM, Steve Wimberg <st...@stevewimberg.com>wrote: > I've seen the idea of using cable lining before. How does one go about > extracting it from the housing? > > Steve > > On Jan 14, 2013, at 12:26 PM, Toshi Takeuchi wrote: > > > I got some plastic tubing that I route the cables through. I thought > > that maybe it's fairly standard practice. The first time I saw it is > > on my Santana tandem, so when I went to my tandem shop (Crank 2 > > tandems in Pleasanton) and got some extra tubing for my Ram there > > (needed some tandem stuff too). I don't know if standard bike shops > > carry this... > > > > Toshi in Oakland, CA > > > > > >> On Mon, Jan 14, 2013 at 12:24 AM, Benz, Sunnyvale, CA < > benzouy...@gmail.com> > >> wrote: > >>> > >>> Seeing that the cable stop on the chainstay is on the bottom of the > >>> chainstay, even if you can route the rear derailleur cable using the > >>> Campagnolo cable guide, how will you address the chainstay cable stop > issue? > >>> > >>> Go with the Teflon cable lining. New cable installations should likely > >>> have extra lengths of housing you can salvage the lining from. > >>> > > > > -- > > You received this message because you are subscribed to the Google > Groups "RBW Owners Bunch" group. > > To post to this group, send email to rbw-owners-bunch@googlegroups.com. > > To unsubscribe from this group, send email to > rbw-owners-bunch+unsubscr...@googlegroups.com. > > For more options, visit this group at > http://groups.google.com/group/rbw-owners-bunch?hl=en. > > > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To post to this group, send email to rbw-owners-bunch@googlegroups.com. > To unsubscribe from this group, send email to > rbw-owners-bunch+unsubscr...@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/rbw-owners-bunch?hl=en. > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bunch@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
