I use Speed Clean at the shop where I work, and it's pretty powerful/nasty stuff. My boss hypothesizes that it's just rebranded carburetor cleaner. I try to wear gloves whenever I use it and only use it sparingly. All that being said, it cuts through the gunk on some neglected/never cleaned/over lubed bikes that nothing else can touch. I do wipe down stuff after I use it.
I doubt that you would hurt the paint, but it never hurts to be careful. Still, I would only use it if stuff is seriously gunked up. Something like simple green and water can clean a lot. On Thursday, December 6, 2012 9:45:25 PM UTC-8, Michael wrote: > > Don't know what kinda finish Rivpaint is, and wanted to know what is safe > and fast to use on drivetrains (derailers/chains/cassetes/cranks/jockey > arms). > > After cleaning, I am gonna Boeshield it all. > > Finish Line Speed Clean looks simplest - just spray it on and all the > grime just falls off, and then the areas sprayed will dry with no rinsing > or wiping. > > Sounds like I could spray the Speed clean, then follow with Boeshield. > That easy? > > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To view this discussion on the web visit https://groups.google.com/d/msg/rbw-owners-bunch/-/bAwzbmVPCSUJ. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
