The crown is the same as we use on lots of other forks, some of which have sidepulls...thats why the recess. It is easy to fill in with right-sized washers or spacers, and it ought to be easy to mount a rack. We do it a lot, and since the crowns come out of the same molds, it's unlikely that your hole would be too small for anything....... You could use a flat washer and a hex nut. G
On Oct 8, 2:39 pm, ted <ted.ke...@comcast.net> wrote: > The rear facing hole in the fork crown on my Bombadil is recessed a > bit like a brake mount, but its smaller. > When I put a Nitto Mini-Front rack on my SimpleOne I used the recessed > allen bolt from a side pull break. > That doesn't work with the Bombadil. But the the back face of the > crown where the hole is isn't flat like the front either. > Do any of you know why the recess on the back face of the Bombadil > fork crown is there? > > Thanks, > Ted -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bunch@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
