I have a 9 cm (measured end-to-end) stem made by Nitto, Not sure what model it is, but it's shorter than the technomic dynamic with only 140 mm length and 85 mm above the minimum in insertion line. Further, it's for 25.4 mm clamp diameter bars and has a hole drilled and tapped for the installation of a bell. Willing to sell for cheap if you're (or anyone else) is interested.
On Oct 1, 11:29 am, Jay <robin...@gmail.com> wrote: > I have a Sam Hillborne with a 10 cm stem Technomic and Noodle bars 5 > cm above saddle height. > > This feels too short. I can reach all the various positions with my > arms almost totally straight, but not locked. > > Also, I would like to try lowering the bars a few cms. Dusting off my > high school trig - lowering the stem 3.25 cm puts the bars 1 cm > farther away. change in stem height. With my current stem this is too > far. > > So - > 1. Do I want 8 cm or 9? > 2. Does anyone have one they want to get rid off? > 3. Does anyone want to buy the 10 cm, with 500 miles and a few > scratches on it? > > Jay -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bunch@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
