It's a horribly executed build on a very very good bike.  Do a quick
mental inventory of the parts that must be replaced when you see it.
If you feel like you'll need to replace lots of stuff, then lower your
offer.  Plan on doing the equivalent of a rebuild at least.  The
number I'd keep in mind is that the Ramb frameset seems to go for
about $750 these days.  If you decide the wheelset and drivetrain are
usable, then for sure $1000 makes sense.  If everything is usable,
then $1200 isn't outrageous.

Of the pictures, the one that concerns me the most is the front wheel
sitting WAY offcenter in the fork.  Make sure you know how to verify
that the fork is not bent.  I'm sure others on the list are better
than me at this, but when doing a tool-free inspection, my approach
would be

1.  make sure the front wheel is seated in the tips properly.
2.  If its way off center like the picture, spin the wheel
3.  if the wheel is reasonably true, take it off and reverse it
4.  if the fork is straight, then the wheel is out of dish, and
reversing it will make it offcenter the same amount to the OPPOSITE
side.  If the fork is bent and the wheel is dished correctly, then the
wheel will be just as badly offcenter to the same side.  If both are
bad, then its harder to separate how bad without tools.

Hopefully it's just that the seller hasn't put the front wheel in all
the way, and there's no problem.

On May 20, 10:51 am, Daniel <aframaf...@gmail.com> wrote:
> I've been looking at look at this Ram on 
> Craigslist:http://inlandempire.craigslist.org/bik/2388442830.html
>
> The cable routing, handlebars and tape are all bugging me, but I'm on
> the fence about going to see it anyway.
>
> What do y'all think?
>
> Daniel

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
To unsubscribe from this group, send email to 
rbw-owners-bunch+unsubscr...@googlegroups.com.
For more options, visit this group at 
http://groups.google.com/group/rbw-owners-bunch?hl=en.

Reply via email to