I've definitely had the chain between the rings - happens on a 9 spd Ultegra triple I've doublized into 48/30 with a 10s chain. I bought some shim washers to push the outer ring further toward the inner (it's on the middle position of the triple), but I'm not using the crank right now and haven't rebuilt yet.
Will On Friday, October 17, 2025 at 7:01:39 AM UTC-4 Patrick Moore wrote: > I use Suntour barcons. Note that the cassette is 10 sp but I use an 11 sp > chain for —so scuttlebutt says— crisper shifting using a chain a generation > later. > > > On Oct 16, 2025, at 20:37, Will Millhiser <[email protected]> wrote: > > > > Patrick, what front shifter are ya usin' with that 11-speed rig? I bet my > problems would go away with friction shifting, but I'm trying to make a go > of it with the Apex brifter. Thx. --Will M > > On Tue, Oct 14, 2025 at 6:39 PM Patrick Moore <[email protected]> wrote: > >> No Silver crank or 10 speed chain, but I am using an 11 speed chain with >> an old Ritchey Logic triple with bash guard in the outer position and 44 >> and 28 in the middle and inner positions, original ring spacing, and while >> I admit I don’t shift rings that often, I have never dropped the chain >> between the rings. >> >> I do recall dropping and spinning a 9 speed chain between the 44 and 30 t >> rings of an old TA Pro 5 Vis double, but for some reason this happened only >> a few times after first installing it, and after these initial incidents it >> went away and I forgot about it. >> >> On Tue, Oct 14, 2025 at 3:51 PM Will Mill <[email protected]> wrote: >> >>> Hey all, >>> >>> Curious about your experiences running the Silver1 42/28 crankset (or >>> 38/24, etc.) with a 10-speed chain. My 650B all-rounder has a full 2014 >>> SRAM Apex 10-speed drivetrain except for a IRD Defiant 46/30 crank. Every >>> so often the 10-spd chain drops between the Defiant's rings and free-spins >>> like it’s in neutral (I think the circa-2014 Defiant is technically a >>> 9-speed). I'd like to swap in my Silver1 42/28, but wondering what luck >>> you've had pairing the Silver1 with a 10-speed chain. It seems from earlier >>> posts* on the Owners Bunch that this works, but I wanted to double-check >>> before I swap. >>> >>> Cheers, >>> WIll M in NY >>> >>> *It seems some of you fixed 42/28 chain drops with FD height tweaks: >>> https://groups.google.com/g/rbw-owners-bunch/c/I7RgPzOEPxQ AND some >>> reported success with 42/28 shifting smoothly with modern chains >>> https://groups.google.com/g/rbw-owners-bunch/c/QNAR_Q7LD6g AND a few >>> reported low doubles like 42/28 very livable: >>> https://groups.google.com/g/rbw-owners-bunch/c/M6002Q2y85c . But I >>> can't seem to see specific answer to the 10-speed question. >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "RBW Owners Bunch" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> To view this discussion visit >>> https://groups.google.com/d/msgid/rbw-owners-bunch/2869e082-4418-4856-99cf-46a05aec2509n%40googlegroups.com >>> >>> <https://groups.google.com/d/msgid/rbw-owners-bunch/2869e082-4418-4856-99cf-46a05aec2509n%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> >> >> -- >> >> Patrick Moore >> Alburquerque, Nuevo Mexico, Etats Unis d'Amerique, Orbis Terrarum >> >> ------------------------------------------------------------------------------------------------------- >> >> Executive resumes, LinkedIn profiles, bios, letters, and other writing >> services >> >> >> ------------------------------------------------------------------------------------------------------- >> >> *When thou didst not, savage, k**now thine own meaning,* >> >> *But wouldst gabble like a** thing most brutish,* >> >> *I endowed thy purposes w**ith words that made them known.* >> >> -- >> You received this message because you are subscribed to a topic in the >> Google Groups "RBW Owners Bunch" group. >> To unsubscribe from this topic, visit >> https://groups.google.com/d/topic/rbw-owners-bunch/dAam5ahjfxY/unsubscribe >> . >> To unsubscribe from this group and all its topics, send an email to >> [email protected]. >> To view this discussion visit >> https://groups.google.com/d/msgid/rbw-owners-bunch/CALuTfgu2bCyRYdXy2J3iC_SjF-ANaC_F5GZF%2BRPKhij9n0rH5w%40mail.gmail.com >> >> <https://groups.google.com/d/msgid/rbw-owners-bunch/CALuTfgu2bCyRYdXy2J3iC_SjF-ANaC_F5GZF%2BRPKhij9n0rH5w%40mail.gmail.com?utm_medium=email&utm_source=footer> >> . >> > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > > To view this discussion visit > https://groups.google.com/d/msgid/rbw-owners-bunch/CANzb%2BSY6xtXaeOQRuLh0-iqXPtpAZ36s1HPevSjfsUN53Zx1jA%40mail.gmail.com > > <https://groups.google.com/d/msgid/rbw-owners-bunch/CANzb%2BSY6xtXaeOQRuLh0-iqXPtpAZ36s1HPevSjfsUN53Zx1jA%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/rbw-owners-bunch/81f0d61e-1b20-4385-ae0b-fffa6133626fn%40googlegroups.com.
