Ah, not sure but I thought my atlantis had a 135 rear wheel spacing. The 7
speed works great with it. Steve
----- Original Message -----
From: "Forrest" <[email protected]>
To: "RBW Owners Bunch" <[email protected]>
Sent: Wednesday, July 07, 2010 1:07 PM
Subject: [RBW] Re: IRD 7-spd freewheel on Phil Wood road hub
My Phil rear hub is not the Rivy kind (wish it were because I love
those cut-outs), but it now appears that this new IRD 7-spd freewheel
(replacing the Sachs 6-spd freewheel) is going to work fine with no
problems -- i.e., plenty of room back there for it in the 130mm
spacing, and wheel can remain dishless. Thanks for input from all! --
Forrest
On Jul 7, 1:48 pm, "Steve Kesling" <[email protected]> wrote:
I have a rivy /phil hub with a 7 speed, it works great on my atlantis.
It's
also a dishless wheel. I've built up two sets and they work fine so fuss
no
muss.
----- Original Message -----
From: "muckum" <[email protected]>
To: "RBW Owners Bunch" <[email protected]>
Sent: Wednesday, July 07, 2010 7:14 AM
Subject: [RBW] Re: IRD 7-spd freewheel on Phil Wood road hub
> If your dealing with a "Rivy" Phil hub- they are made to take 7.
> I have one on an Atlantis. works great in Any gear combo.
> On Jul 5, 7:30 pm, Forrest <[email protected]> wrote:
>> I'm hoping to put an IRD 7-spd freewheel (from RBW) on a Phil Wood
>> road hub, easy as pie, no fuss and no muss. The 7-spd will take the
>> place of a Sachs 6-spd freewheel.
>> Has anyone on this forum successfully made a change like this without
>> a lot of rigmarole?
>> I just read the following on the Phil Wood web site, and it has me
>> thinking this might end up being trickier than I thought:
>> "(IRD freewheels are spaced differently and should you intend to use
>> one of their freewheels, it is recommended that you look at our IRD-
>> specific offerings.)"
>> Any insights (especially from personal experience) about this would be
>> most welcome. Thanks.
>> -- Forrest (Iowa City)
> --
> You received this message because you are subscribed to the Google
> Groups
> "RBW Owners Bunch" group.
> To post to this group, send email to [email protected].
> To unsubscribe from this group, send email to
> [email protected].
> For more options, visit this group at
>http://groups.google.com/group/rbw-owners-bunch?hl=en.
--
You received this message because you are subscribed to the Google Groups
"RBW Owners Bunch" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to
[email protected].
For more options, visit this group at
http://groups.google.com/group/rbw-owners-bunch?hl=en.
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to
[email protected].
For more options, visit this group at
http://groups.google.com/group/rbw-owners-bunch?hl=en.
