Re: [RBW] Possible to Shorten Brake Cable/Housing

[Jason Noonievut]

Thanks for those tips for next time! Jason On Jan 16, 2025, at 11:27 PM, Oliver Moss <oliverdanielm...@gmail.com> wrote: You can also back out the barrel adjuster half, or a little more, before clamping the brakes to the rim and tightening the pinch bolt. This allows you to turn it in and dial in the right distance from the rim.  On Thursday, January 16, 2025 at 10:38:31 PM UTC-5 Michael Connors wrote: I squeeze the calipers against the rim using a clamp. Then pull the cable with my fingers, not too tight. When the clamp is released the pads move to approximately the right location. If it needs further adjustment mark the desired spot on the cable using a sharpie or tape and move it. -- You received this message because you are subscribed to a topic in the Google Groups "RBW Owners Bunch" group. To unsubscribe from this topic, visit https://groups.google.com/d/topic/rbw-owners-bunch/1hJNdHFf70c/unsubscribe. To unsubscribe from this group and all its topics, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion visit https://groups.google.com/d/msgid/rbw-owners-bunch/3cea590a-4f3a-4990-b460-241608af58b5n%40googlegroups.com. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion visit https://groups.google.com/d/msgid/rbw-owners-bunch/1850B8B2-494F-4599-A048-887C4170EA15%40gmail.com.