Here's an old blog post that shows this particular Rosco Bubbe model: https://rivbike.tumblr.com/post/154226333284/the-rosco-bubbe-project-frames-and-a-few-demos
Max On Fri, Sep 27, 2024 at 1:25 PM Bill Lindsay <tapebu...@gmail.com> wrote: > Rivendell Bicycle Works has at times farmed out frame and fork manufacture > to different manufacturers. That, plus a couple other nuances of their > supply chain have at times left them with a bunch of extra forks. Grant is > trying to "train his replacement(s)" and move more and more agency to the > younger generation, so they took the opportunity to let other Riv folks > design a small batch of frames to fit the extra forks. Those various > frames have all carried the Rosco Bubbe name and head badge. One of the > Rosco Bubbe models was designed by Roman, and was a step through frame for > wide 650B tires in "Roman's size". That particular Rosco Bubbe took on the > nickname "Medium Mountain Mixte". Some people get/got super indignant over > the detail that Roman's Rosco Bubbe is not, technically, a mixte. I tried > to call mine "Trusty MUSTy", where MUST stands for Mountain Utility Step > Through. I had one for a while, and I had a Rosco Bubbe Road model for a > while as well. Both of those bikes had this kind of weird rear dropout > architecture, and I think they "learned from their mistakes". The dropout > itself has never been on a full-on production Riv. > > Bill Lindsay > El Cerrito, CA > > On Friday, September 27, 2024 at 9:31:47 AM UTC-7 Jim M. wrote: > >> I give up -- what's an MMM? >> >> On Friday, September 27, 2024 at 7:59:45 AM UTC-7 maxcr wrote: >> >>> Thanks Bill, that makes sense. >>> >>> Is there an "ideal" drivetrain for this frame? Should I just try a >>> larger chainring? or would a double or triple work better? >>> >>> I imagine the 11-speed isn't the problem since the small 11 cog will be >>> essentially in the same place regardless. I ordered a 7 speed 13-42 >>> cassette from Riv, hoping that maybe the larger cog will help. I'll report >>> back but any insights would be appreciated. >>> >>> Also, anyone know what was the rationale behind using horizontal >>> dropouts on these frames? >>> >>> Max >>> On Thursday, September 26, 2024 at 11:28:21 PM UTC-4 Bill Lindsay wrote: >>> >>>> Your bike just isn't made to work with that drivetrain. Look at >>>> basically any other bike on earth and see where the center of the rear hub >>>> is relative to the chainstay. They are pretty much on the same level. On >>>> the MMM the modified horizontal dropout holds the rear axle about 15mm >>>> below the chainstay, so the chain is going to rub if you try to ride the >>>> bike with both a small chainring and a small cog. >>>> >>>> It's just not a good drivetrain choice for that frame set. You'd want >>>> a normal vertical dropout on the MMM to accommodate a 1x drivetrain. >>>> >>>> Those dropouts were the one thing I didn't like about the MMM. I'd >>>> still buy mine back if it was offered to me, but the dropouts were a >>>> negative. >>>> >>>> Bill Lindsay >>>> El Cerrito, CA >>>> On Thursday, September 26, 2024 at 7:34:23 PM UTC-7 maxcr wrote: >>>> >>>>> I finally took the xtracycle off the mmm and found some time to work >>>>> on my build. >>>>> >>>>> My amateur mechanic plan to build it up as a 1x11 was: White >>>>> Industries front crank, 36 TSR chainring and a SLX 11 speed 11-42 cassette >>>>> and a Shimano GRX RD-RX812. >>>>> >>>>> Take a look at the picture below. For some reason the chain hits the >>>>> chainstay close to the cassette when it's on the small cog. It's like the >>>>> chainstay should be lower. Any ideas what might be going on? >>>>> >>>>> The frame looks straight, the chainline on a 110 phil bb seems to be >>>>> around 45.5mm. I tried a different wheel, a 9 speed 11-32 cassette and a >>>>> larger chainring but it doesn't work. >>>>> >>>>> Thanks for sharing your knowledge. >>>>> >>>>> Max in Boston >>>>> >>>>> >>>>> [image: IMG_9772.jpeg] >>>>> >>>> -- > You received this message because you are subscribed to a topic in the > Google Groups "RBW Owners Bunch" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/rbw-owners-bunch/gSoO1v0_Xps/unsubscribe > . > To unsubscribe from this group and all its topics, send an email to > rbw-owners-bunch+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/rbw-owners-bunch/ccf8775e-dfc9-4e42-ac09-3a5247b4662fn%40googlegroups.com > <https://groups.google.com/d/msgid/rbw-owners-bunch/ccf8775e-dfc9-4e42-ac09-3a5247b4662fn%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- Max Faingezicht -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/CAN5P1LtHW1qBuo0k5EhYKB8ekWg7%2BJocFrF_iw4dC8Cju6aDLg%40mail.gmail.com.
