I mount my mud flaps on the inside, it curves the flap and helps it stay in place rather than deflecting in the wind. Some planet bike flaps fit over the end of the fender (both inside and outside?).
Angus On Jun 10, 9:18 am, rswat...@me.com wrote: > I use inside mounting. Am I the only one? I zip-tie the leather flap > to an appropriately sized piece of plastic (credit card works great) > and "snap" the plastic bit inside the metal fender between the rolled > edges. Secure, quick release, no fender modification needed. Zip tie > is just for insurance. Friction usually holds it between the plastic > card and the fender just fine. > > Cheers, > Ryan > > On Jun 10, 2010, at 7:31, Mike <mjawn...@gmail.com> wrote: > > > There was an article in an old issue of Bicycle Quarterly about > > mounting leather flaps inside the fender. This is for folks using > > aluminum fenders. You can check their back issue index for finding the > > article. But with a VO flap or Riv Sackville flap it needs to go > > outside. I have the VO flaps on my commuter, they're great. I like the > > looks of the Sackville more and they're lighter and have the > > reflective strip on them. > > > --mike > > > -- > > You received this message because you are subscribed to the Google > > Groups "RBW Owners Bunch" group. > > To post to this group, send email to rbw-owners- > > bu...@googlegroups.com. > > To unsubscribe from this group, send email to > > rbw-owners-bunch+unsubscr...@googlegroups.com > > . > > For more options, visit this group > > athttp://groups.google.com/group/rbw-owners-bunch?hl=en > > . -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bu...@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
