Cork's good if you need a biggish spacer. I have used a stack of 4-5 presta valve nuts in smaller gaps, too...
Steve -----Original Message----- From: rbw-owners-bunch@googlegroups.com [mailto:rbw-owners-bu...@googlegroups.com]on Behalf Of Johnny Alien Sent: Wednesday, May 12, 2010 8:27 PM To: RBW Owners Bunch Subject: [RBW] Re: Installing Fenders Question Ahhh yes the cork. I HAVE seen taht done before. That is a great idea guys, thanks! On May 12, 8:11 pm, Rene Sterental <orthie...@gmail.com> wrote: > Best solution is to take the cork from a bottle of wine and trim it so it > gives you the proper spacing. Then just drill it so you can use a screw/nut > of the proper length. On the SKS fenders, you may have to remove the metal > tongue that is meant to hook over the tube between the stays and avoid using > a screw if my memory serves me well... > > René > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To post to this group, send email to rbw-owners-bu...@googlegroups.com. > To unsubscribe from this group, send email to > rbw-owners-bunch+unsubscr...@googlegroups.com. > For more options, visit this group > athttp://groups.google.com/group/rbw-owners-bunch?hl=en. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bu...@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bu...@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
