Thanks, Erik and others. Garth, come to think of it, I think that I did ask this before -- more Ralph Wiggumry. Oh well.
And I would prefer disc brakes, tho' that's not a deal breaker. Also, any Monocog replacement would be a single speed, or perhaps use a hub gear -- typical wide range 3 speed or perhaps a 2 speed kickback; but probably just a simple single speed. The dealbreaker tho' is 76 mm tires with 5 mm clearance on each side, so 86 mm between stays at tire level. Garth, I find that an extra cm of width and corresponding 5 psi or so drop in pressure makes a huge difference when negotiating sand. 60 mm at 19 psi is much better than 50 mm at 23 psi, but 71-2 mm at 13-15 psi is even better, and 76mm+ I daresay would improve things further. On Tue, May 24, 2022 at 11:28 PM Erik <[email protected]> wrote: > Well, that sand looks brutal! As you noted, the max listed tire size on > the Gus or Susie is 2.8, but I feel like that would be pushing it for a > couple of reasons. I'm running 29" x 2.5 Terravail Ehlines. They measure > about 62mm without any weight on them on Cliffhanger rims, tubeless. They > have plenty of clearance on the sides (about 12mm on the front, a little > less in the rear). I measured the distance between the inside of the > chainstays and it looks like it's right about 80mm (I wasn't measuring with > calipers!), so I don't think you could fit 3" tires (about 76mm) with any > meaningful room to spare. The forks have a little more clearance so maybe > a slightly larger front tire would be possible. > > The bigger issue that I would see with trying to get even larger tires on > the back is the bottom bracket width necessary to keep the chain off of the > tire. It would push the chainline out pretty far. It's a 73mm shell and > I'm running a 122 IRD bottom bracket with spacers. Even with that and a > chainline that is waaaay outboard, the chain runs pretty close to the tire > in the 50t gear in the back. I think that if I sized up even to the 2.8 I > might have to switch up to a 127 BB, pushing the chainline out even > further. You almost need Boost spacing at that point to push the cassette > further out in line with the front chainring. Otherwise the front > chainring is starting to line up with the smallest cog which makes for a > terrible chainline. That's my amateur opinion at any rate! I'm sure > someone on here has tried it or knows this better than I do. > > Otherwise, even with "just" 2.5 inch tires it's handled the terrain just > fine and was easy to keep on track on multiple surfaces, including rocky > sections and sections with lots of roots and loose gravel. It was equally > fine with all of it. Sand, however, is another matter. We don't have much > of that on the trails in my area so I can't really speak to it. > > I may try out a larger front tire soon and will happily report back. I > don't think I'm going to try a larger rear tire for the reasons above re: > chainline. > > And thanks for the nod on the build! Happy with all the shiny bits. > > Erik > >> >> >> -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/rbw-owners-bunch/d8ca52d4-a8b3-499f-bea6-a3ca85fd1eabn%40googlegroups.com > <https://groups.google.com/d/msgid/rbw-owners-bunch/d8ca52d4-a8b3-499f-bea6-a3ca85fd1eabn%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- ----------------------------------------------------------------------- Patrick Moore Alburquerque, Nuevo Mexico, Etats Unis d'Amerique, Orbis Terrarum -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/CALuTfgtiUUb4zUygjgynqeMcxfUTPrWR_uprmtnOmi_Jy0DdYA%40mail.gmail.com.
