pete: i dig your PATC sticker! paul takoma park, md. On Monday, March 15, 2021 at 11:19:15 AM UTC-4 Pete B wrote:
> Here's my work space, in a corner of the basement. The newest addition is > a 1977 Snap-On tool chest that I rescued from the curb on trash day and > restored. > > The blue thing behind the vice is a homebrew truing stand that came with a > used dishing tool I bought on Ebay. It's held in place with a bench vise. I > drilled and tapped it for screws that are used for fine adjustment. Acorn > nuts protect the rim from gouging. It works pretty well for the couple > times a year I use it. > > The machinist vise is another Ebay find I picked up in 2013 for about $40. > It's a Prentiss Bulldog with 3" jaws, probably close to 100 years old now. > I have it and the Park work stand mounted to an old cutting board. I had > this held to my old bench with bolts and wingnuts, instead of bar clamps. > This arrangement allows me to swivel the vise to the front of the bench, or > temporarily remove it. > > Riv content: Silver2 shifters and Nitto HiRiser on the Trek 950. > > Pete > Arlington, VA > > [image: IMG_8282.jpg] > [image: image0(1).jpeg] > [image: IMG_5820.jpg] > On Monday, March 15, 2021 at 9:50:48 AM UTC-4 lconley wrote: > >> Get that vise installed! Most important tool in the shop - how else can >> you hacksaw rack struts? ;-) >> >> Laing >> >> On Friday, March 12, 2021 at 7:33:01 PM UTC-5 Kieran J wrote >> >>> >>> >>> [image: IMG_8782.JPG] >>> >>> KJ >>> >>> -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/170d9f7f-206d-4e34-b4b3-024609449616n%40googlegroups.com.
