Hmm... 11-speed Campy should work with 9-speed Shimano cassette/ derailleur.
On Apr 9, 3:27 pm, Michael_S <mikeybi...@rocketmail.com> wrote: > the rear dérailleur goes along for the ride. See the table and info on > this link... > > http://www.ctc.org.uk/desktopdefault.aspx?tabid=3946 > > some people with a lot of time on their hands figured this all out. > > ~Mike~ > > On Apr 9, 6:30 am, "Frederick, Steve" <frede...@mail.lib.msu.edu> > wrote: > > > Interesting! Would one use a Shimano rear derailer with such a setup? > > > Steve > > > -----Original Message----- > > From: rbw-owners-bunch@googlegroups.com > > > [mailto:rbw-owners-bu...@googlegroups.com]on Behalf Of Michael_S > > Sent: Thursday, April 08, 2010 5:16 PM > > To: RBW Owners Bunch > > Subject: [RBW] Re: Brifter-friendly triples? > > > heck , you don't even need a Jtek thingamajig! The cable pull on 10 > > speed Camp ergo shifters matches the spacing on 8 speed ShimaNo > > splined cassettes. Many Monstercrossers have use this combo because > > they prefer the Campy lever feel to the ShimaNo and you don't have > > that messy cable to deal with. ( shift cable is routed under bartape). > > And ShimaNo and SRAM and IRD all make the big tooth touring cassettes. > > (Campy's biggest is 29t). I have this set-up on my tandem and it > > works great. > > > ~Mike~ > > > On Apr 8, 1:18 pm, Ron Farnsworth <r2far...@yahoo.com> wrote: > > > Regarding the Shimano road triples being on the tall side, you do know > > > that you can put together an IRD 13 - 34 in the rear? Mine's a 10 speed > > > though. > > > > --- On Thu, 4/8/10, Aaron Thomas <aaron.a.tho...@gmail.com> wrote: > > > > From: Aaron Thomas <aaron.a.tho...@gmail.com> > > > Subject: [RBW] Re: Brifter-friendly triples? > > > To: "RBW Owners Bunch" <rbw-owners-bunch@googlegroups.com> > > > Date: Thursday, April 8, 2010, 4:05 PM > > > > In the past I've used Campy ergo levers with a triple and it worked > > > flawlessly. I don't recall whether the rings were even ramped/pinned. > > > > You just need to get the appropriate Jtek Shiftmate rollamajig thing > > > for your derailleur/cassette match-up: > > > >http://jtekengineering.com/shiftmate.htm > > > > On Apr 8, 11:35 am, Steve Palincsar <palin...@his.com> wrote: > > > > > On Thu, 2010-04-08 at 10:05 -0700, M. Chandler wrote: > > > > > Shimano's road triples are too tall for my needs, so I'm wondering if > > > > > there are brifter-friendly cranks in the 26/36/46 range out there. > > > > > I've got a Sugino XD triple that's 24/36/48, but the big ring isn't > > > > > ramped (and I suspect the rings are spaced for an 8-speed chain). > > > > > Current derailleurs are XT (rear) and Deore (front), so I'd probably > > > > > need to swap out the Deore for something with the correct cable pull. > > > > > Cassette is 9-speed, so that probably limits my brifter choice to NOS/ > > > > > used stuff. > > > > > So get a ramped, pinned chain ring for it. TA makes them. > > > > -- > > > You received this message because you are subscribed to the Google Groups > > > "RBW Owners Bunch" group. > > > To post to this group, send email to rbw-owners-bu...@googlegroups.com. > > > To unsubscribe from this group, send email to > > > rbw-owners-bunch+unsubscr...@googlegroups.com. > > > For more options, visit this group > > > athttp://groups.google.com/group/rbw-owners-bunch?hl=en. > > > > -- > > > You received this message because you are subscribed to the Google Groups > > > "RBW Owners Bunch" group. > > > To post to this group, send email to rbw-owners-bu...@googlegroups.com. > > > To unsubscribe from this group, send email to > > > rbw-owners-bunch+unsubscr...@googlegroups.com. > > > For more options, visit this group > > > athttp://groups.google.com/group/rbw-owners-bunch?hl=en. > > > -- > > You received this message because you are subscribed to the Google Groups > > "RBW Owners Bunch" group. > > To post to this group, send email to rbw-owners-bu...@googlegroups.com. > > To unsubscribe from this group, send email to > > rbw-owners-bunch+unsubscr...@googlegroups.com. > > For more options, visit this group > > athttp://groups.google.com/group/rbw-owners-bunch?hl=en.-Hide quoted text - > > > - Show quoted text - -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bu...@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
