I’m not the best mechanic, but I’ve been able to set up 8 and 9 speed shifters in friction and index mode just fine. This thing is hurting me though. Setup: -1x10 -11x42 or something like that sunrace cassette -newer xt shadow derailleur with wolftooth roadlink -dura ace 10 speed shifter on Paul thumbie
Previously, I had this bike in friction mode, but on the high gears, I couldn’t get the chain to stay on one ring, lots of ghost shifting. So I got a 10 speed index shifter, put it on and can’t get it to shift remotely well. The three big low gears are fine but the bottom/high 7 are all over the place. The weirdest part is that when I set it up, it sits in the highest gear fine, but as I shift around and play with it, it won’t go back to that gear, and as I play with it more, it won’t even go into the second highest gear. When I unclamp the cable, it resets and goes back into the high gear. The other weird thing is that the limit screws don’t hit the piece they are supposed to to make adjustments. They are super far away and barely touch when fully screwed in. Maybe this is a result of the roadlink? I’m about to just buy an 8 speed cassette and go friction, but if anyone has any advice I’d love to hear it. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
