Takashi - brilliant! I'll have to take a stab at something like that. Spaced out and forgot that I will have v-brakes which greatly simplify things (as Joe pointed out)...but I'm all for clever solutions anyhow!
Reginald - sounds like a cool product. Time to peruse eBay... Sent from my Verizon Wireless 4G LTE DROID On Tue, Oct 16, 2018, 7:40 AM WETH <erlhous...@gmail.com> wrote: > Takashi, > That is awesome! Did you create something similar on the front. > The video and photos are quite helpful. > With thanks, > Erl > > > On Tuesday, October 16, 2018 at 9:36:46 AM UTC-4, Takashi wrote: >> >> Forgot to add that I put SKS QR on rear dropout. >> >> Takashi >> >> >> Takashi wrote: >>> >>> Here's what I have on my Hunq: >>> >>> I bought a piece of metal at local hardware store and filed off some bit. >>> I attached it to the fender / kickstand mount on chainstays. >>> >>> >>> I inserted a T-nut to fender, and a wing bolt to the T-nut. (Some >>> creativity will be required if your fenders are not wood.) >>> >>> >>> I bought an L-shaped piece of metal, filed off some bit, and attached it >>> to the sliding clip (bridge hardware) of the fender. >>> >>> >>> I inserted a long (50mm?) bolt into the hole of seatstay bridge >>> (inserted upward from under the bridge), and put some nuts, washers, and a >>> wingnut. >>> >>> >>> ...And I can remove it without a tool! >>> >>> https://www.flickr.com/gp/77318553@N08/917NA3 >>> (Sorry about lousy movie) >>> >>> Takashi >>> >>> >>> Tully Lanter wrote: >>>> >>>> My upcoming Clem will pull occasional MTB duty. Our trails tend to have >>>> lots of sticks and vegetation, so I'll probably remove the fenders. >>>> >>>> Has anyone rigged up a way to attach fender brackets in some sort of >>>> quick-release fashion? Perhaps hardware like this >>>> <https://www.jegs.com/i/Quik-Latch/658/QL-25-SB/10002/-1?CAWELAID=230006180030683992&CAGPSPN=pla&CAAGID=44693592161&CATCI=pla-226259915351&catargetid=230006180039220943&cadevice=c&jegspromo=nonbrand&gclid=Cj0KCQjw9ZDeBRD9ARIsAMbAmoaP-ViAcQVr2hDQo444xaKPothoWls2IWqPGBIzD9kpvTf3U4ptYF8aAgO8EALw_wcB> >>>> has >>>> potential, if the right sizes are available... >>>> >>>> (I'm aware of Speed-Ez and other truly QR fenders, but they lack both >>>> width and overall coverage.) >>>> >>> -- > You received this message because you are subscribed to a topic in the > Google Groups "RBW Owners Bunch" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/rbw-owners-bunch/MBPWVib7LEs/unsubscribe > . > To unsubscribe from this group and all its topics, send an email to > rbw-owners-bunch+unsubscr...@googlegroups.com. > To post to this group, send email to rbw-owners-bunch@googlegroups.com. > Visit this group at https://groups.google.com/group/rbw-owners-bunch. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
