What I think works well is to rubber cement an extra layer of leather across 
the palm of some cycling gloves to spread out the pressure. Most of the so 
called padding in cycling gloves is a joke. 

--- On Wed, 2/24/10, Tim McNamara <tim...@bitstream.net> wrote:


From: Tim McNamara <tim...@bitstream.net>
Subject: [RBW] Re: Bar height and hand pain... don't know what else to do...
To: rbw-owners-bunch@googlegroups.com
Date: Wednesday, February 24, 2010, 9:36 AM



On Feb 24, 2010, at 1:13 AM, Rene Sterental wrote:

> Can anybody offer more insight into what I might try doing to deal with the 
> pain in my hands?

Hand *pain* when riding is fairly unusual IME.  Focal numbness is common enough 
that there is a name for it:  cyclist's palsy or handlebar palsy.  It's caused 
by compression of the ulnar nerve and causes numbness of the ring and little 
fingers.  Sometimes there is pain, from what I've read.  Googling for this 
might find some helpful articles- here's one:

http://recoverydoctor.blogspot.com/2009/08/cyclist-palsy-ulnar-neuropathy-handle.html

In terms of immediate practical recommendations, play with handlebar angle to 
see if that helps to get the pressure off the tender area.  Try double wrapping 
the bars or using even a couple of layers of cork tape- a larger diameter might 
be helpful.  There are gel inserts you can buy to go under the tape, too.  And 
as others have said, saddle position and angle might be helpful; for one thing, 
make sure your saddle is not too high or too far back (ever since Greg Lemond's 
book, cyclists have been shoving saddles as far back as possible and often too 
far back).

Good luck!

--You received this message because you are subscribed to the Google Groups 
"RBW Owners Bunch" group.
To post to this group, send email to rbw-owners-bu...@googlegroups.com.
To unsubscribe from this group, send email to 
rbw-owners-bunch+unsubscr...@googlegroups.com.
For more options, visit this group at 
http://groups.google.com/group/rbw-owners-bunch?hl=en.




      

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To post to this group, send email to rbw-owners-bu...@googlegroups.com.
To unsubscribe from this group, send email to 
rbw-owners-bunch+unsubscr...@googlegroups.com.
For more options, visit this group at 
http://groups.google.com/group/rbw-owners-bunch?hl=en.

Reply via email to