Ray, I used them with excellent results in my Gunnar (pre-Rivendell) as it had S&S couplers so I could travel with it. They never require an adjustments as they are designed to always be used with the same parts, to allow easy separation.
If you are going to be using them to swap different handlebars on the same bike, then you'll be facing the delicate challenge of making sure that the length of the cables on both handlebars are exactly identical, as they will be connected to the rear section of the cables that remain on the frame. If they are not identical, you'll be forced to make adjustments every time you change handlebars, as the total cable length from shifter/brake to derailers/brakes will change. It can be done, but be prepared to go through several sets of cables before you nail it! René -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bu...@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
