On Tuesday, October 24, 2017 at 8:36:13 AM UTC-7, Tom Norton wrote: > > Anyone had any experience with the above type light?
Some. I prefer to braze a mount onto the NDS seatstay and attach the light to that, but it's just as easy to run a power lead out a fender stay and up to the light. A fancy way to do it (credit to Bob K @ Bantam Cycles) is to use tiny steel tubing for your fender stay and fish the power lead out to the fender through that. Many people will run the wiring out from the bottom bracket via the inside of the fender (either via peeling open the crimp at the fender edge and running the wire through that or just by taping it into place with suitably stout tape) but I don't like doing either of those because I don't like to put anything in the filth channel between the fender and the tire. (Plus you can't reliably crimp plastic fenders.) -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
