No. You should not drill holes in your frame. You can have a frame builder braze in reinforced openings to fish the wire through but that will also ruin the paint. On my AHH I used a thin bead of Shoe Goop adhesive. I embedded the wire in the goop and in about an hour it is dry and won't come off. I have been riding mine for 3 years now that way with no issues. The nice thing about the shoe goop is you can just peel it off if need be and it does not hurt the paint.
My bike looks, for the most part, looks like it has no wires. I also used it inside the fenders to adhere the wires as well. Much better than zip ties IMHO. This site: http://www.velolumino.com/ Sells ultra thin, high strength wire specifically for dyno lights etc. He also sells quick disconnect kits and grommets for passing wires through fenders. On Thursday, August 3, 2017 at 12:54:04 PM UTC-4, Carla Waugh wrote: > Have any of you drilled holes to run your wire Internally? I'm having it > installed on my Sam. Thanks -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
