When I was going to use the P&S on my Bomba the plan was to use Tubus hardware. The mounts fit in the slots meant for the bracket and a custom bend for the stays to the fork crown.
Hardware something like this: http://bit.ly/29Q1YNU Ended up with the rack on the Cheviot instead but the concept seemed sound and the test fittings were good. Dan Marin, CA > On Jul 6, 2016, at 7:42 AM, David Banzer <daban...@gmail.com> wrote: > > I'm not sure if that would be an option for the P&S. The included bracket to > fork crown works significantly better than any other fork crown bracket I've > ever used. That being said, it should be pretty easy to use Nitto rack > attachments to attach to the top of crown mounts - I'm intending on trying > this out soon. > David > Chicago > >> On Tuesday, July 5, 2016 at 10:05:24 PM UTC-5, Garth wrote: >> Pudge, does he offer to make the rack to attach to the two on top fork >> crown mounts instead of the single middle brake mount ? > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to rbw-owners-bunch+unsubscr...@googlegroups.com. > To post to this group, send email to rbw-owners-bunch@googlegroups.com. > Visit this group at https://groups.google.com/group/rbw-owners-bunch. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
