Hi, not sure if this helps, but for what it's worth, here's another view of a Nitto front rack and a fender, though the rack isn't the "Mark's" model. There's an attachment point on the underside of the rack for securing the fender but I don't use it and don't have any problems so far.
But it's there and if I ever put a bolt through it, I'll probably use the cork trick I saw in the previous post and elsewhere. An artisan- shellacked cork, of course. ;) http://www.flickr.com/photos/emptybits/4167391009 -Darren. On Dec 1, 12:24 pm, Michael Glaser <mgla...@gmail.com> wrote: > I just installed a set of Honjo fenders on my 700c AHH with center- > pull brakes. The "nose" of the front fender is significantly longer > than the nose of the SKS/Esge fender it's replacing, and I've noticed > a bit of sway. In fact, it bounces against the tire when I ride over > rough pavement. I've been considering a front rack for some time, but > I really need to add an attachment point for the fender. The Nitto > Mini Front would be perfect, but I've got a center-pull brake mounted > to the fork crown. So, I'm trying to decide between a Nitto Mark's > Rack and a Gilles Berthoud front rack for center-pull / side-pull > brakes. I have a Tubus Luna rack on the rear of the bike, and though > it's not a primary consideration, it would be nice if the two racks > looked good together. I'd appreciate any thoughts or recommendations > from the group. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bu...@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
