Hi Patrick, Assuming it's the same seat lug as other Rivs (excepting Clem, I think), then you'll need to replace the "M6 Hex Socket Cap, 22mm length" with the security bolt.
I went with the pitlock skewers and seat post binder bolt. They're really spendy, but I don't worry about my wheels or seat post anymore. I think the visible parts of the pitlock skewers are nice looking, for what that's worth. (One could still take the saddle by unscrewing at the rail/post interface.) There are ways to secure the quill, but, other than putting a ball bearing in there, it gets complicated. If I was that concerned about it, I probably wouldn't be riding my Riv. Good luck! shoji On Friday, February 12, 2016 at 12:49:34 AM UTC-5, Patrick D Kelly wrote: > > I've got a joe appaloosa on order. I'd like to try out securing my seat > post and saddle with bolts from http://www.bicyclebolts.com/. Anybody > know what size/which bolts I should get? > > I've used pinhead locking skewers on my bikes up to now. Any > (anti-)recommendations for skewers and the joe? > > Assuming I used a good u-lock and sheldon brown locking method, are there > any other bits that I can/should worry about locking? I'm guessing there's > nothing to be done (nothing available) for the quill stem/handle bar. > > mahalo > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
