I think these might be the skinniest tires in that range. Hmmmm, Little Big Bens, MSO, Nano40, Marathon Supreme and Hyper-X. These are the Supremes, and they measure around 37-38 IIRC. The fatter-ish tires on the other rims are not having this problem.
The O-rings might be a fix. But put on the inside of the rim. I was thinking something like this: http://www.amazon.com/Schrader-Presta-Rubber-Rim-Hole-Adaptor/dp/B000XNZU1S On Fri, Sep 18, 2015 at 4:49 PM, Ron Mc <bulldog...@gmail.com> wrote: > I mentioned on another thread that I use UV-resistant O-rings on my valve > stems. I put one on before the nut, and another after the nut. This keeps > the nut from over-tightening or spinning loose, and provides some measure > of damping at the rim. > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to rbw-owners-bunch+unsubscr...@googlegroups.com. > To post to this group, send email to rbw-owners-bunch@googlegroups.com. > Visit this group at http://groups.google.com/group/rbw-owners-bunch. > For more options, visit https://groups.google.com/d/optout. > -- Cheers, David Member, Supreme Council of Cyberspace "it isn't a contest. Just enjoy the ride." - Seth Vidal -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at http://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
