Regarding shifter alternatives, I suggest you consider trying these mounted so the shifter is on the inside/underside of the bar
http://www.rivbike.com/product-p/shsrtsr.htm http://www.rivbike.com/product-p/shsrtsl.htm I think I have seen folks do sort of the same set up with the paul thumbies and shimano bar ends, but these would be less expensive and the adjustable angle on the cable exit seems better. Also RBW say: "Nice enough looking for any bike. " On Sunday, August 2, 2015 at 3:32:58 PM UTC-7, ed k wrote: > > Thanks everybody for dragging me into 2010 when Dynasys became the cool > thing. Somehow I managed to miss all of that, probably out riding my bike. > It certainly is not mentioned in the adverts for shifters. > > Let me take a step back and ask some advice: this is being driven by my > wife's somewhat precarious balance, and her trouble in moving hands off the > bar to shift. I am trying to keep the controls under her fingertips. We > have tried bar-ends, Thumbies and stem-mounted levers, with little success. > I see a choice between triggers and twist shifters, both of which look > really out of place on the beautiful Betty Foy. But I have to go with the > practical solution. > > If I go back to a 9-speed drivetrain I think I get more choices in > shifters. Is that right? I am willing to scrap the whole 105 setup and > start again with Riv-standard Deore if need be. This is attractive also > because I had the bike spec'd and assembled by someone else, and he went > with the 10-speed 11-28 cassette and 105 derailers. Turns out to have been > a poor choice. > > Can anybody suggest a combination that's not quite so ugly? Or another > solution for a wobbly rider? > > Thanks, and sorry for the thread hijack > > On Sunday, August 2, 2015 at 5:41:02 PM UTC-4, Jeremy Till wrote: >> >> This-- 10 spd Shimano Road does not equal 10spd Shimano Mountain >> (Dynasys). Usually, the conflict is the other way--people wanting to use >> the wide-range dynasys cassettes with their shimano road shifters (in which >> case, a 9spd mountain bike rear derailleur will work). In this case, the >> answer would be to use the 10spd road flat bar shifters that shimano makes. >> I think currently they're offered in the Tiagra product line, and work >> really well. >> >> On Sunday, August 2, 2015 at 12:14:09 PM UTC-7, iamkeith wrote: >>> >>> Sorr y for short reply - on smart phone at moment, but can expand later >>> if necessary. >>> >>> Shimano changed derailleur movement ratio for mountain groups only with >>> advent of 10 speed. They call it dynasys. All previous derailleurs with >>> exception of older dura ace were 1.67:1 (often cited as 2:1. Forget >>> dynasys ratio at moment but closerto 1:1. Easiest thing for you to do now >>> Iis get a dynasys rear d. Note that road 10 speed is still older ratio and >>> wont work >> >> -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at http://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
