I was excited to see this thread because I was planning to do this to my 
wife's Betty. So I pulled the trigger (ha) and bought a set of Albatross 
bars from Riv and Shimano SL-T670 shifters from Nashbar. Went to set it up 
this morning.

The bike has 105 derailers and a 10-speed cassette.  The shifters are 3x10. 
 But the rear shifter/derailer/cassette are not playing well.  It seems 
like the derailer is traveling too far for each click of the shifter.  The 
derailer traverses the entire 10-speed cassette in just 6 clicks of the 
10-speed shifter.  

Everything I read on the interwebs says that this combo ought to work. 
 10-speed + 10-speed + Shimano derailer = happiness.  But either the 
shifter is pulling too much cable or the derailer is pivoting wrong.  I 
can't tell which.

The setup I replaced used Dura-Ace indexed levers.  10-speeds, no problem. 
  The cable is anchored to the derailer the same way, not cockeyed which 
might change the ratio, according to Sheldon.

I have not taken this to the LBS, because I think they would immediately 
say "won't work, buy this".  I want to check with some people experienced 
with doing this mix-and-match setup.  Any ideas, please?  What did I miss?

(I have not tried the front yet, but I know that it may not work either 
because the road/MTB front derailers do have different ratios.  I am ready 
to swap in a Deore just in case.)

Thanks

Ed K
Rockville MD


On Friday, July 17, 2015 at 11:00:23 PM UTC-4, Steve Cole wrote:
>
> I know Riv doesn't generally condone/approve of the use of trigger 
> shifters -- they don't sell them.  I'm wondering whether any list members 
> have used them and, if so, whether you might recommend them when compared 
> to bar ends with Albatross bars.
>
> Thanks for your reply.
>
> Steve Cole
> Arlington, VA
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at http://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

Reply via email to