Jim- I had the same problem on my Riv Road conversion (650x38b), so I swapped out the long front mudflap for the shorty flap Riv sells.
On Tue, Jan 13, 2015 at 11:56 PM, Jim Bronson <jim.bron...@gmail.com> wrote: > or you could go with something like this instead > > http://www.buddyflaps.com/fancy.htm > > On Tue, Jan 13, 2015 at 11:33 PM, Chris Chen <cc...@nougat.org> wrote: > > A pair of scissors will take care of that long front flap problem :) > > > > Of course now I'm running P50 chromaplastics without the flap and well > we'll > > see how it that goes > > > > On Tue, Jan 13, 2015 at 8:35 PM, Jim Bronson <jim.bron...@gmail.com> > wrote: > >> > >> The P45s are really a little too long for my bike with 650Bx38, when I > >> tried to bolt them in on the back side of the fork with Sheldon nuts, > the > >> flap was dragging all over the place. I moved it back to the front > side of > >> the fork. > >> > >> If the P50s are a little shorter, I'd probably like that. Some trimming > >> on the front of the rear fender would probably be required to get it > between > >> the seat stays, though. > >> > >> On Jan 13, 2015 4:54 PM, "Wildcat96" <cschoentha...@gmail.com> wrote: > >>> > >>> I had the new P55 Longboards on my old XO-2 and currently have the new > >>> P50 Longboards on my 650b Hillborne. The new P50 Longboards are > definitely > >>> longer than the P55 Longboards and even the fender itself appear to be > a > >>> little longer than the old P50's without the flaps (I have a set of > those as > >>> well). None are near as long as the original P45 Longboards however > (got > >>> those too). The new P50's fit my Hillborne with 650b x 41 Fatty > Rumpkins > >>> just about perfectly, but I am using Sheldon's Fender Nuts to get the > front > >>> fender a little higher and flatter in the fork crown for clearance. > >>> > >>> On Monday, January 12, 2015 at 9:18:05 AM UTC-6, Hudson Doerge wrote: > >>>> > >>>> Greetings all, > >>>> I'm looking to pick up new fenders for compass babyshoe passes and > want > >>>> to go with plastic fenders. I have SKS p50s on my Simpleone and they > work > >>>> well enough, but are the old style, not Longboard. According to Riv > all of > >>>> their SKS fenders are now "longboard style with mudflaps and longer > length," > >>>> but I'm wondering if that means they're all the same length. In > particular > >>>> if the p55s are the same overall length as the p50. I'd prefer the > extra > >>>> width of the p55, but I definitely want the extra length. Any info > would be > >>>> great! > >>>> -Hudson in ATX > >>> > >>> -- > >>> You received this message because you are subscribed to the Google > Groups > >>> "RBW Owners Bunch" group. > >>> To unsubscribe from this group and stop receiving emails from it, send > an > >>> email to rbw-owners-bunch+unsubscr...@googlegroups.com. > >>> To post to this group, send email to rbw-owners-bunch@googlegroups.com > . > >>> Visit this group at http://groups.google.com/group/rbw-owners-bunch. > >>> For more options, visit https://groups.google.com/d/optout. > >> > >> -- > >> You received this message because you are subscribed to the Google > Groups > >> "RBW Owners Bunch" group. > >> To unsubscribe from this group and stop receiving emails from it, send > an > >> email to rbw-owners-bunch+unsubscr...@googlegroups.com. > >> To post to this group, send email to rbw-owners-bunch@googlegroups.com. > >> Visit this group at http://groups.google.com/group/rbw-owners-bunch. > >> For more options, visit https://groups.google.com/d/optout. > > > > > > > > > > -- > > "I want the kind of six pack you can't drink." -- Micah > > > > -- > > You received this message because you are subscribed to the Google Groups > > "RBW Owners Bunch" group. > > To unsubscribe from this group and stop receiving emails from it, send an > > email to rbw-owners-bunch+unsubscr...@googlegroups.com. > > To post to this group, send email to rbw-owners-bunch@googlegroups.com. > > Visit this group at http://groups.google.com/group/rbw-owners-bunch. > > For more options, visit https://groups.google.com/d/optout. > > > > -- > Keep the metal side up and the rubber side down! > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to rbw-owners-bunch+unsubscr...@googlegroups.com. > To post to this group, send email to rbw-owners-bunch@googlegroups.com. > Visit this group at http://groups.google.com/group/rbw-owners-bunch. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at http://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
