The P45s are really a little too long for my bike with 650Bx38, when I tried to bolt them in on the back side of the fork with Sheldon nuts, the flap was dragging all over the place. I moved it back to the front side of the fork.
If the P50s are a little shorter, I'd probably like that. Some trimming on the front of the rear fender would probably be required to get it between the seat stays, though. On Jan 13, 2015 4:54 PM, "Wildcat96" <cschoentha...@gmail.com> wrote: > I had the new P55 Longboards on my old XO-2 and currently have the new P50 > Longboards on my 650b Hillborne. The new P50 Longboards are definitely > longer than the P55 Longboards and even the fender itself appear to be a > little longer than the old P50's without the flaps (I have a set of those > as well). None are near as long as the original P45 Longboards however > (got those too). The new P50's fit my Hillborne with 650b x 41 Fatty > Rumpkins just about perfectly, but I am using Sheldon's Fender Nuts to get > the front fender a little higher and flatter in the fork crown for > clearance. > > On Monday, January 12, 2015 at 9:18:05 AM UTC-6, Hudson Doerge wrote: >> >> Greetings all, >> I'm looking to pick up new fenders for compass babyshoe passes and want >> to go with plastic fenders. I have SKS p50s on my Simpleone and they work >> well enough, but are the old style, not Longboard. According to Riv all of >> their SKS fenders are now "longboard style with mudflaps and longer >> length," but I'm wondering if that means they're all the same length. In >> particular if the p55s are the same overall length as the p50. I'd prefer >> the extra width of the p55, but I definitely want the extra length. Any >> info would be great! >> -Hudson in ATX >> > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to rbw-owners-bunch+unsubscr...@googlegroups.com. > To post to this group, send email to rbw-owners-bunch@googlegroups.com. > Visit this group at http://groups.google.com/group/rbw-owners-bunch. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at http://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
