Brad- I'll include all the hardware shown on the Rivbike photos. But I'll keep the (used) P-clamps if you don't need them. I have plenty of bikes without braze-ons.
PM me your shipping address. Tim On Tue, Sep 16, 2014 at 9:09 AM, franklyn <sini...@msn.com> wrote: > In my experience, the 4-strut mounting > <https://www.flickr.com/photos/franklyn/7617926224/in/set-72157627342403464> > is much more secured and stable than the two struts plus the diving board. > Using the struts at fork crown also cleans up the area around and under the > brake holes for less interference with brakes, etc. > > Franklyn > Berkeley, CA > > > On Tuesday, September 16, 2014 5:31:49 AM UTC-7, jinxed wrote: >> >> Tim, >> For sure two struts to mid fork fork braze ons and the diving >> board...although I DO have top of the fork mounting bolts too and have been >> considering trying the 4 strut boogie. > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to rbw-owners-bunch+unsubscr...@googlegroups.com. > To post to this group, send email to rbw-owners-bunch@googlegroups.com. > Visit this group at http://groups.google.com/group/rbw-owners-bunch. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at http://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
