I run 65/75, because I weigh 265 and I get pinch flats if I run less than 60/70. My main concern is smoothing out the chip seal and those pressures work fine for doing that.
On Wed, Jun 25, 2014 at 2:57 PM, Dave Johnston <jdi...@gmail.com> wrote: > Why are everybodies F& R tire pressures so close? Are you really that > centered over the wheels? I recently started running 45/65 psi on Cypress > based on a 40%/60% weight distribution and its been a revelation that my > front was pumped to hard and my rear not enough. The lower pressure in the > front has made my hands much more comfortable and the higher pressure in > the rear hasn't been much noticeable in my tush. > > -Dave > > > On Sunday, June 22, 2014 1:21:47 PM UTC-4, Anne Paulson wrote: >> >> I got back yesterday from Sierra to the Sea, a 586 mile supported bike >> tour from Lake Tahoe to San Francisco. >> >> I used the Grand Bois Cypres tires. I now want to report that they were >> splendid. We encountered some roads with terrible pavement, as I knew we >> would since this was my second year on the trip. The tires are marked for >> 75-95 psi, so I initially tried 80 psi. After a day, I let out some air; >> around 60 psi ended up working well for me. >> >> Others would slow down on the bumpy downhills, but I just zoomed. My >> buddy with narrow tires was constantly crowing about how great his tires >> were. When I followed him on some bad stretches of pavement on the flats, I >> grew tired of his weaving around trying to find a good line, whereas I just >> rode straight with no trouble. >> >> No flats, no problems. >> >> I still think that there ought to be a standard way to measure bike tire >> width, so we can compare tires from different vendors. But these tires >> (which still measure 30mm wide on my bike) performed admirably. >> >> -- >> -- Anne Paulson >> >> It isn't a contest. Enjoy the ride. >> > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to rbw-owners-bunch+unsubscr...@googlegroups.com. > To post to this group, send email to rbw-owners-bunch@googlegroups.com. > Visit this group at http://groups.google.com/group/rbw-owners-bunch. > For more options, visit https://groups.google.com/d/optout. > -- Keep the metal side up and the rubber side down! -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at http://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
