Now there's good information we can use. I've puzzled over this question several times over the last couple of years. A corresponding list of lever cable pulls would also be helpful. In my own crude measurements and experience, "standard" levers have the pivot about an inch from the cable mount, and "long pull" about an inch-and-a-quarter. I definitely need long pulls on 110 mm brakes, and have used standards up to 84 mm. But that leaves a whole bunch of brakes in between. And there must be other levers out there besides the Tektro road long pulls.
Thanks for compiling. dougP On Friday, June 20, 2014 9:12:47 AM UTC-7, Mark Chandler / GRAVELBIKE.com wrote: > > If you want to know if a particular v-brake will clear your bike's tire or > fender, I've compiled a list of arm lengths for popular v-brakes. This is a > living document, and I'll update it as more info becomes available (not all > manu's list their brakes' lengths). > > The list is available here: > http://www.gravelbike.com/?p=3298 > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at http://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
