Shoe Goo is essentially the same product as Goop. Both are sealant/ adhesives, have similar applications, and are produced/marketed by the same company. Their gap-filling, waterproof, flexible qualites make them popular for shoe repair, resoling, etc...
Goop is of medium viscosity straight from the tube, but the solvents begin to quickly evaporate, increasing its viscosity and making in possible to use without a terrible mess. In this workable state, it will not run on you. Apply a small amount to each surface and allow to set for a several minutes before pressing the surfaces together. I believe the solvent in Goop/ShoeGoo is toluene. Nasty stuff. The fumes are quite annoying at the least, and can be dangerous depending on the amount inhaled. The glue will smell for the entire 24hrs it takes to cure. I'd recommend against doing this project inside your home. ...and apparently I was correct when I assumed that Riv used Goop (in the referenced thread). --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en -~----------~----~----~----~------~----~------~--~---
