Steve Suehring wrote:
>
> On Fri, 4 Feb 2000, Hugh Irvine wrote:
> > What dictionary are you using? The standard Radiator dictionary specifies this:
> >
> > ATTRIBUTE Idle-Timeout 28 integer
> >
>
> Ours is the same.
>
> > And what about Service-Type? Cisco's are very picky about requiring a
> > Service-Type that matches the request in the Access-Accept.
>
> I'm curious as to why it works with everything _but_ single channel ISDN!
>
Steve, per-user stuff like idle or absolute timeouts work only for async
interfaces, but not for isdn interfaces. The workaround is to use
virtual-profiles and then a virtual-access interface will be cloned for the
user. If you include a timeout attribute ( Idle-Timeout or Session-Timeout ) for
a ISDN users, you'll get an authorization fault.
Multilink PPP works ok for you because a virtual-access interface is cloned for
the mlppp bundle, and when cloned, per-user attributes can be configured without
problems in the vacces config. You can check it with "show inter virtual-access
x conf".
Félix
______________________________________________________________________
DATAGRAMA SERVICIOS GLOBALES IP
C/ Acer 30 Pho: +34 93 223 00 98
08038 Barcelona ( SPAIN ) Fax: +34 93 223 12 66
mailto:[EMAIL PROTECTED] http://www.datagrama.net
______________________________________________________________________
ÿ
Archive at http://www.thesite.com.au/~radiator/
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.
