Hi Hugh,
[...]
> I suggest two things:
>
> 1. check what Radiator thinks its sending with a debug trace 4
I did this and found the source of the problem. Quoting myself in other
correspondence related to this:
> Therein lay the pointer to the answer: the RADIUS reply had miscellaneous
> A-V pairs in it which corresponded with some garbage in the file, like
> this:
>
> neale Auth-Type = "System"
> Service-Type = NAS-Prompt-User
> Framed-Protocol = PPP,
> Framed-IP-Address = 255.255.255.254,
> Framed-IP-Netmask = 255.255.255.255,
> Framed-Routing = None,
> Framed-MTU = 1500,
> Ascend-Idle-Limit = 3600
[snip]
With this cleaned up, desired/normal behavoiour happens :-)
So the main problem is solved, although a few minor mysteries remain.
Thanks,
Neale.
===
Archive at http://www.thesite.com.au/~radiator/
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.
